Jaquar Shock test Control System
Key Features
- Random Control
- Multiple Input – Multiple Output
- Sine Control / Analysis
- Throughput to Disk
- Advanced Data Conversion
- Shock Synthesis
Advantages
- true closed-loop controlled test
- Random vibration testing
- JAGUAR recreates multiple degree of freedom environments in the laboratory
- Jaguar Systems provide an extra level of flexibility
- multi shaker control (MIMO) systems
Application
- Quality & reliability testing
- Durability testing
- Operating status of parts and products in extreme conditions.
Technical Data
Output Channels
| Output Channels | 1 to 16+.Compatible with electrohydraulic and electrodynamic exciters |
| Input Channels | 8 to 588 (with ACPs Synchronized) |
| Synchronization board | Sample rate clock and critical timing signals shared via phase-locked roop |
| connector type | Standard BNC for input and Output |
| ACP Controller | 1GHz RISC Processor/512 MB RAM |
| Host Interface | Base T-Ethernet |
| Throughput disk | 1TB SSD(optional) |
Input Channels
| Dynamic range | Greater Than 95 db |
| Amplitude Accuracy | +/-0.03% Full Scale |
| Overload detection | Full scale on all channels |
| Maximum input signal | +/-35 V without component Damage |
| Voltage ranges | Random, Shock And Signal analysis %%mV to 10V,in 3dB steps Swept Sine:27mV to 10V in 1dB steps |
| Sampling rate | Up to 102.4K sample/Sec |
| Sample Rate Multiplier | 2.56 to 81.92 selectable over-sampling |
| Sampling interval | None: simultaneous on all channels |
| Freq. range reduction | decimation & filtering by on-board DSPs |
| Freq. accuracy | +/-5ppm |
| Anti-aliasing filters | Analog filters cutoff freq. alias Attentions Band-pass ripple digital filters Cutoff freq. fixed at255Khz Greater than 96 dB/octave within +/-0.10 dB Variable (50 to 10 000 Hz) |